Hi, if you use NetSight console, mark a port in the normal port flexview or interface summary flexview, right-click and select "Port Monitor". Once the window and port information is shown wait at least 30 seconds (refresh interval) and you will see the same information like at Cisco's "show interface".
Hope this helps. Kind regards, Markus ___________________________ On 16.01.2013, at 04:49, John Kaftan <[email protected]> wrote: Just came over from Cisco and we used to be able to do a "Show Interface" command and see the 5 min average utilization for a specific port. It was nice to be able to see that. I guess Cisco was just calculating that for us as it went along. Does Enterasys do this? Is there a Mib I can hit for a 5 min port utilization average? I don't see it in the CLI so I am thinking not. I did find the flexview for port utilization but it looks like it is calculating that after you open the flexview. I would like to be able to just pull that info up on the fly like when doing the "show system utilization" command. I don't want to wait 5 min to get the 5 min average. What I am doing is creating an ultimate interface flexview, i.e., one view for all of the port info I am typically looking for. Thanks -- John Kaftan IT Infrastructure Manager Utica College - --To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected] --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
