Hi Guys, Have you looked at RMON history? The default is a 30 minute window but it is configurable if you must have 1 and 5 minute intervals. The CLI command is "show rmon history <port#>"
Regards, Dave Sillsby Escalation Support Engineer Enterasys Networks 9 Northeastern Blvd Salem, NH 03079 "There is nothing more important than our customers." On Wed, Jan 16, 2013 at 8:24 AM, Wyland, Tony <[email protected]> wrote: > I too have asked about this functionality in the CLI and Enterasys > points to NetSight BUT the times that this capability is the most important > is when communications from NetSight may not be possible due to yuckness on > the switch/network. On non-Enterasys switches, this has been very helpful > to locate a source port of “junk” (extreme traffic or errors) that was > dragging a switch down. You find the port, disable it and work on finding > the real source of the problem while most of the users are become happy > quicker on a now working switch stack.**** > > **** > > Just a plug that it would still be a very useful feature that is > implemented on many other brands. Don’t get me wrong, we love our > Enterasys switches and there are many things done the way we like.**** > > ** ** > > Tony Wyland**** > > Messiah College**** > > ** ** > > *From:* Markus Kaiser [mailto:[email protected]] > *Sent:* Wednesday, January 16, 2013 3:29 AM > *To:* Enterasys Customer Mailing List > *Subject:* Re: [enterasys] Mib for 1 min and 5 min average for port > throughput**** > > ** ** > > Hi,**** > > ** ** > > if you use NetSight console, mark a port in the normal port flexview or > interface summary flexview, right-click and select "Port Monitor".**** > > Once the window and port information is shown wait at least 30 seconds > (refresh interval) and you will see the same information like at Cisco's > "show interface".**** > > ** ** > > Hope this helps.**** > > ** ** > > Kind regards,**** > > ** ** > > Markus**** > > ** ** > > > ___________________________**** > > > On 16.01.2013, at 04:49, John Kaftan <[email protected]> wrote:**** > > Just came over from Cisco and we used to be able to do a "Show > Interface" command and see the 5 min average utilization for a specific > port. It was nice to be able to see that. I guess Cisco was just > calculating that for us as it went along. **** > > **** > > Does Enterasys do this? Is there a Mib I can hit for a 5 min port > utilization average? I don't see it in the CLI so I am thinking not. I > did find the flexview for port utilization but it looks like it is > calculating that after you open the flexview. I would like to be able to > just pull that info up on the fly like when doing the "show system > utilization" command. I don't want to wait 5 min to get the 5 min average. > **** > > **** > > What I am doing is creating an ultimate interface flexview, i.e., one view > for all of the port info I am typically looking for. > **** > > Thanks > -- **** > > John Kaftan**** > > IT Infrastructure Manager**** > > Utica College**** > > ** ** > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] **** > > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] **** > > > - --To unsubscribe from enterasys, send email to [email protected] with > the body: unsubscribe enterasys [email protected] > > --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
