Hi Joshua, I think you are missing this config :
N Chassis(su)->set igmp enable 5 N Chassis(su)->set igmp enable 10 N Chassis(su)->set igmp enable 20 N Chassis(su)->set igmp query-enable 10 N Chassis(su)->set igmp query-enable 5 (If the computers should be able to receive the stream as well) This enables IGMP on the VLANs and IGMP queries on 10 & 5 in switch mode. If it is still not working you may need to have a look at the IGMP snooping configuration on the 3750. In the N-Series Config Guide, there is a pretty good example of a Multicast configuration. Kind Regards Dennis Mit freundlichen Grüßen / Best regards Dennis Flemmig (Dipl.-Ing.) Senior System Engineer [cid:[email protected]] CANCOM DIDAS GmbH Elisabeth-Selbert-Str. 4a 40764 Langenfeld Deutschland Phone +49 2173 5966-470 Fax +49 2173 5966-610 Mobile +49 172 5219729 [email protected]<mailto:[email protected]> www.cancom-didas.de<http://www.cancom-didas.de/> CANCOM DIDAS GmbH Sitz der Gesellschaft: Langenfeld AG Düsseldorf HRB 63231, USt-Id Nr.: DE811548338 Geschäftsführer: Dirk Kiefer, Thorsten Eska Diese E-Mail und alle mitgesendeten Dateien sind vertraulich und ausschließlich für den Gebrauch durch den Empfänger bestimmt! This e-mail and any files transmitted with it are confidential intended solely for the use of the addressee! Von: [email protected] [mailto:[email protected]] Gesendet: Dienstag, 21. Oktober 2014 01:22 An: Enterasys Customer Mailing List Betreff: [enterasys] Multicast config I'm trying to configure PIM-SM on a Enterasys N7 so Multicast traffic can route from a server hanging off the N7 to a Vlan Trunk going to a Cisco 3750 where some phones are located. I was just wondering if I could have another pair of eyes look at my config because it's not currently working. This is what I have, please tell me if I'm missing anything. interface vlan 5 *** this is the vlan our computers sit on. It's here because it's in the trunk going to the 3750 ip address 10.205.1.1 255.255.248.0 ip pim sparse-mode interface vlan 10 *** this is the vlan our phones are on ip address 10.210.1.1 255.255.248.0 ip pim sparse-mode interface vlan 20 *** this is where the server is hanging off ip address 10.220.1.1 255.255.248.0 ip pim sparse-mode ip pim bsr-candidate vlan 5 ip pim rp-candidate 10.205.1.1 224.0.0.0 224.0.0.0 Joshua Sanders Asst. Vice President - Systems Operations Western Mutual Insurance Group [email protected]<mailto:[email protected]> * --To unsubscribe from enterasys, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe enterasys [email protected]<mailto:[email protected]> --- To unsubscribe from enterasys, send email to [email protected] with the body: unsubscribe enterasys [email protected]
