> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tim Williams
> Sent: Saturday, November 25, 2000 2:52 AM
> To: [EMAIL PROTECTED]
> Subject: Re: EOS Omnibounce (dissapointed)
>
>
> On your homepage, the results page, page Two...
> http://www.kjsl.com/~jbdavis/Photo_Tests/Omni2/omni2.html
> The white box on the counter almost blends right into the tile. I don't
> think that is acceptable lighting - certainly not for the wedding I am
> shooting in 12 hours (I better get to bed!)
That doesn't have anything to do with "acceptable" or "unacceptable"
lighting... it's more a matter of exposure, ore printing, or scanning, or
your computer's monitor.
Realize that all the Omnibounce does is create a mix of direct and bounced
light. If you're in a dark (or extremely large) environment, the bounce
effect is going to be extremely small. All you'll get is the direct light
from the flash, at a lower intensity because of the Omnibounce. If you need
to soften the light coming directly from the flash, your only solution is to
make the flash into a larger source, one that will wrap around the subject
more. An on-camera soft box or a very large bounce card is the way to
accomplish this.
Chuck Skinner
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
