I set my EOS 30's (=7E) C.Fn.11 to 1 and C.Fn.12 to 1. And the camera works
fine. Yes indeed, to enable direct selection I have to turn ECF off and do
the focusing first using the AE-L button (C.Fn.4 set to 1). I found that the
camera focusing function had to be activated, before I could select focusing
point manually. Hope this help.
Now since I set the C.Fn.4 to 1, I seem to lose the FE-L capability. I was
hoping that the function was done by the shutter button, but it seemed to do
only the AE-L. I assume it as a bug in camera software. Does any EOS 3 or
EOS 1 user experience the same problem?
Luke
From: "Ken Durling" <[EMAIL PROTECTED]>
> 2) Re: C.Fn.11 - when set at <1> it's supposed to enable direct focus
> point selection with the 4 buttons on the Quick control dial. Doesn't
> seem to do that, but in paranthesis it says (Automatic selection with
> the <focusing point selector button>) The buttons on the QCD work
> fine in other modes. Have I got a malfunction?
Which mode are you having trouble with? If you have a 7E, do you have ECF
switched off?
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
