Tom Pfeiffer wrote:
>
> ----- Original Message -----
> From: "Gary Russell" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Wednesday, February 07, 2001 3:33 PM
> Subject: Re: EOS 2CR5 and PB-E2
>
> > Cian:
> >
> > The Power Booster PB-E2 uses eight AA batteries only. It will not accept
> a
> > 2CR5. I also have a PB-E1 that I use on the EOS 3 occasionally and this
> > unit takes four AA batteries and also a 2CR5. You may use either power
> from
> > the 4 AAs or one 2CR5 via a selector switch, and the unit operates when
> just
> > one battery type is installed.
> > ***********************************************************
>
> The PB-E1 is a booster, and only uses AA batteries or Nicad packs. What you
> meant was the BP-E1 battery pack. It's easy to transpose those two
> consonants; later in you post you got it right....
>
> Tom P.
Does the PB-E1 (not the BP-E1) have vertical controls? I know the PB-E2
does, and the BP-E1 does not. What is the basic functional difference
between the PB-E1 and -E2? I have a 1n, both will fit.
Skip
--
Shadowcatcher Imagery
http://www.shadowcatcherimagery.com
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
