At 9:17 AM -0400 6/10/01, Julian Loke wrote:
>The IR diode does not have to be near the shutter at all.
>It just has to be somewhere along the sprocket line of the
>film path as it passes under the pressure plate.
Well, that's what I meant. By putting it in the sprocket line of the
film path as it passes under the pressure plate you've basically
stuck it fairly close to the shutter. :)
>Maybe WJM was referring to the date imprint hole in the
>pressure plate?
Yes. Like your 1000FN, I can confirm that the Rebel II S I looked at
in the store has the pressure plate hole. I also noticed that it
looked like a kind of spring-loaded plate. Perhaps the pressure plate
off an Elan (which doesn't have a hole) or something would be
compatible.
- Neil K.
--
49N 16' 123W 7' / Vancouver, BC, Canada / [EMAIL PROTECTED]
The satin finish provides darkly deviant good looks
*
****
*******
***********************************************************
* For list instructions, including unsubscribe, see:
* http://www.a1.nl/phomepag/markerink/eos_list.htm
***********************************************************
