> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ronald R. > Levandoski, DMD, Ltd. > Sent: 18 November 2004 14:28 > To: [EMAIL PROTECTED] > Subject: EOS > > > I have a problem that may have a simple answer, then again > maybe not. I > have the Canon 10D. I cannot get the onboard flash to open no matter > how hard I press the button on the prism cover area. Is there > something > I am not doing? Is there something short of disassembly that I can do > to get this thing to open the flash? >
Doesn't the 10D have the pre-programmed modes (a.k.a. "idiot" modes), for sports, landscape, portrait and the green zone? If the mode dial is set to one of these, very few manual adjustments can be made. AFAIK, even the flash button won't work. The flash will pop up automatically only when the camera thinks it needs it. If you are in the modes P, Av, Tv or M, you'll be able to pop up the flash by pressing the button. If you don't press the button, the camera doesn't do it automatically. Shashvat ============================================================================== This message is for the sole use of the intended recipient. If you received this message in error please delete it and notify us. If this message was misdirected, CSFB does not waive any confidentiality or privilege. CSFB retains and monitors electronic communications sent through its network. Instructions transmitted over this system are not binding on CSFB until they are confirmed by us. Message transmission is not guaranteed to be secure. ============================================================================== * **** ******* *********************************************************** * For list instructions, including unsubscribe, see: * http://www.a1.nl/phomepag/markerink/eos_list.htm ***********************************************************
