----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
|
You are correct if you want to install the Alon type panel you do have to cut the panel and need
to install the glare shield which you can not do with the flat winshield. Of course you could install
the panel without the glare shield and then you would have less room for instruments.
DICK NANCY & SOPHIE
-------Original Message-------
Kevin: I have not tried to put in the Alon style with a flat windshield, but the information I got with the Alon panel indicated that you needed the bubble windshield in place in order to use the floating panel with the gyros. They are mounted quite high, and I believe you must cut out the glare shield in order for the altimeter to fit. If you cut out the glare shield, you cut into the area below the flat windshield in front of the pilot.
Lynn ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/ | |||
|
|
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers/
