----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


This should really be on the Tech site.  Anyway, I was taught to push the throttle all the way in on a touch and go and then push the carb heat in a second or so later.  Works for me.

Syd


James B. Brennan wrote:
Interesting discussion on carb heat.  I don't know if anyone has mentioned it, but the air when on carb heat is unfiltered.  Therefore, ground operation should be limited.

I just had a Wings lesson in the pattern with an experienced "old timer" and he kind of told me the opposite. He said that on a touch and go if you pushed in the carb head before you gave full throttle on a check ride, you'd be busted on the premise that the linkages could screw up and you might not get your full throttle. His rational for picking up FOD is that operations are blowing it off the runway anyway, so no sweat. I am not reiterating this as an advocate, but as a student who got this info from a very experienced CFII for $50. All I can suggest is ask about. I think there was another instance where he told me not to cut carb heat has I had been formerly instructed - it all came as a bit of a shock to me - same reason as you cite.

Jim B.

Yeah, carb heat = no filter

==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm

Reply via email to