----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----


Last winter when I was working on my solo, I found in cold weather if I had carb heat on at landing and did a touch and go, when I pushed in the carb heat before I gave it full throttle, it would caugh and sputter as it throttled up.  If I left carb heat on, gave it full throttle and then took carb heat off, it returned to full rpm faster.  Don't know why, but from then on, that is the way I do it.  Sputtering on take-off is a bad feeling.
 
Fred
----- Original Message -----
From: James B. Brennan
To: Chris
Cc: Darick Gundy ; [email protected]
Sent: Thursday, May 25, 2006 9:11 PM
Subject: Re: [COUPERS-FLYIN] RE: [COUPERS-TECH] On carb ice

Interesting discussion on carb heat.  I don't know if anyone has mentioned it, but the air when on carb heat is unfiltered.  Therefore, ground operation should be limited.

I just had a Wings lesson in the pattern with an experienced "old timer" and he kind of told me the opposite. He said that on a touch and go if you pushed in the carb head before you gave full throttle on a check ride, you'd be busted on the premise that the linkages could screw up and you might not get your full throttle. His rational for picking up FOD is that operations are blowing it off the runway anyway, so no sweat. I am not reiterating this as an advocate, but as a student who got this info from a very experienced CFII for $50. All I can suggest is ask about. I think there was another instance where he told me not to cut carb heat has I had been formerly instructed - it all came as a bit of a shock to me - same reason as you cite.

Jim B.

Yeah, carb heat = no filter
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm

Reply via email to