----[Please read http://ercoupers.com/disclaimer.htm before following any 
advice in this forum.]----


At 10:11 PM 5/25/2006, James B. Brennan wrote:
you pushed in the carb head before you gave full throttle on a check ride, you'd be busted on the premise that the linkages could screw up and you might not get your full throttle.

I don't follow that. How could the order of operation influence the linkages screwing up?

If you're in a go-around situation, you probably want full power right NOW. You won't get it with the carb heat on! Also, full power operation with carb heat reduces the detonation margin of the engine. Probably not an issue with a low compression beast like ours, but worth considering.


John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm

Reply via email to