----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hi All...
The hanger I rent has a small 12 volt winch with
enough cable to winch our 'Coupe into the hanger backwards.
The ground is a bit uneven and there is a bit of a
lip (about 1.5 inches ) up to the hanger floor. The winch goes slowly enough and
I can adequately steer with my tow bar. This would make getting the a/c into the
hanger a whole lot easier.
Question is will I do any damage to any part of the
tail bulkheads or structure if I winched it in backwards with the cable
attatched to the tail tie down point?
Looking forward to responses.
Cheers
BobP
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
