----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
My Alon has the same problem, and it already has trim tabs on each side. I remember a mechanic said I should bend the tab only on one side but I don't remember the rule as to which side and direction (up/down) to use, anybody know what I'm referring to and remember the rule? And, I understand one should bend the tab with a couple of pieces of 2x4 so the entire tab gets bent evenly. Ralph Finch Davis, California > From: "roger anderson" <[EMAIL PROTECTED]> > Subject: Re: [COUPERS-TECH] new ercoupe owner > > I picked up a Coupe in Houston a couple of years ago. I > also flew home with it wanting to roll left, holding right > aileron for the hours back to Tennessee. On the ground > when home, all rigging and alignment looked correct. > Realizing the majority here will recommend following the > coupe procedure of bending the trailing edge of the aileron > as a trim method, I prefered a small trim tab being installed > instead. I just don't like bending the wing structure. > Also, any future minor adjustments can be easily made with a > trim tab. A small tab slipped in and rivited between the wing > trailing edge corrected the problem and it flew beautifully > hands off after that. roger ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm Search the archives on http://escribe.com/aviation/coupers-tech/
