Re: [COUPERS-TECH] Tech and training

Wed, 30 Nov 2005 15:40:06 -0800 

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Dave,
 
I should have added, here's Tony's web site if you just wanted to get his guide on recovering.   roger
 
http://www.intercom.net/~markl/
----- Original Message -----
From: David Douglas Winters
To: 'Eliacim Cortes' ; [EMAIL PROTECTED] ; [email protected]
Sent: Wednesday, November 30, 2005 3:30 PM
Subject: RE: [COUPERS-TECH] Tech and training

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----

In that same vein, my old coupe needs new wing fabric.  Looks like the job will fall to me.

 

Is there a definitive “How To” reference out there? (This really intimidates me.)

 

How big is the job?  How long should it take?  Should I just find an expert to ensure it is done right?

 

Nobody in my town wants the job.

 

Dave Winters

 

-----Original Message-----
From: Eliacim Cortes [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 30, 2005 3:11 AM
To: [EMAIL PROTECTED]; [email protected]
Subject: Re: [COUPERS-TECH] Tech and training

 

 
----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
 
 
Sparky
I can answer your second question. You can train for Sport Pilot in any aircraft, even one that's not sport pilot compliant. However, you can't act as Pilot in Command except if the plane is sport pilot compliant, meaning that all dual instruction is fine in a (non sport compliant) 415E, but any soloing (as a student or after certification) and your check ride MUST be in a sport complaint 415 C or CD.
Eliacim Cortes
N87071  
----- Original Message -----
Sent: Tuesday, November 29, 2005 9:16 PM
Subject: [COUPERS-TECH] Tech and training

----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hello,
 
Wanted to check some issues with the group.
 
Has anyone had experience with a fabric recovering system that goes by the name "Hipec" ???   It is supposed to be a Low Tox alterative to traditional dope. They have a website and I do see  ercoupe in approval list for Cert.
 
Also want to find out if I can do my flight training in a 415E with rudder pedals (Not LSA),  then hoping to purchase and restore a 415C for checkout and personal use thereafter under LSA rules.
 
Finally,  I have a stainless header tank from a coupe.   Seams are soldered.  One seem has a small tear.  Is the solder the same stuff that is used for circuitboards and commercial electronics ?    I was hoping to heat it up briefly with a small butane torch and let the solder flow back into the open seam.
 
Thanks,
 
"Sparky"
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/




==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
Search the archives on http://escribe.com/aviation/coupers-tech/

Reply via email to