----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Anybody in the Ercoupe board who can let me have a copy of an approved 337 for the Zeftronics regulator? I recall somebody here had a Zeftronics. Just learned that Cheief Aircraft Inc prices the Zeftronics at $ 135!!, even cheaper than a refurbished Delco!! Eliacim N87071 Quoting JThomas Terry <[EMAIL PROTECTED]>: > Historically, it helps if you have a previously approved 337 for your > local FSDO to look at along with your request. Historically, if the > inspector sees that someone else has approved the same thing in the > past, he/she will not look so closely or take as long. > > Tommy > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Monday, February 20, 2006 12:52 PM > To: [email protected] > Subject: [COUPERS-TECH] Fwd: RE: Replacing a Delco 1118383 > > ----[Please read http://ercoupers.com/disclaimer.htm before following > any advice in this forum.]---- > > > Thankfully, my "generator" problem turned out to be just a bad voltage > regulator. My choices are to buy a refurbished Delco 1118383 for $ 140 > or to > upgrade to the Zeftronics G1120N for $ 200. > However, to install the Zeftronics I need a 337 & field approval. > > How do I go about this? > > Do I fill a 337 with the proposed change, hand carry it to the FAA FDO > and > then wait, wait and wait, while legally grounded??? > > Does my A&P IA have to sign it? > > Eliacim Cortes > N87071 > > > > ----- Forwarded message from [EMAIL PROTECTED] ----- > Date: Mon, 20 Feb 2006 12:31:55 -0600 > From: [EMAIL PROTECTED] > Reply-To: [EMAIL PROTECTED] > Subject: RE: Replacing a Delco 1118383 > To: 'heavensounds' <[EMAIL PROTECTED]> > > Hello Eliacim, > > The G1120N is PMA'ed for the replacement 1118383. The G1120N is a > direct > replacement to the Delco PN: 1118383. However, the Ercoupe 415C is not > STC'ed or PMA'ed for the G1120N. To install the G1120N on the aircraft > you > will need a 337 and field approval. > > > Please let us know if we can further assist you in solving your > electrical > charging system needs. > > Thank you > Sales > > -----Original Message----- > From: heavensounds [mailto:[EMAIL PROTECTED] > Sent: Saturday, February 18, 2006 10:40 PM > To: [EMAIL PROTECTED] > Subject: Replacing a Delco 1118383 > > > Is the Zeftronics G1120N STC'd to replace a Delco 1118383 on an > Ercoupe > 415C? > If not, how can this be legally done? > Please let me know > Thanks > Eliacim Cortes > > ----- End forwarded message ----- > > > > ======================================================================== > ====== > To leave this forum go to: http://ercoupers.com/lists.htm > > > > ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
