----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 10:13 AM 4/23/2006, [EMAIL PROTECTED] wrote:
Dose any one in the group know what size of rivets to use in replacing the
Glass in the side sliding windows to attach them to the upper and
lower stiffeners?
Lynn's advice not withstanding,
the rivets called for by Erco are AN470A4-5 rivets. We always supply
some -6 rivets for the handles. We recommend drilling the holes
1/32" oversized. You can use either special drill bits designed for
plastic or an Irwin #1 Unibit also works well. It has 1/8 and 5/32
(and 3/16) steps on it.
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
