----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Follow up questions: 1. Is the screen eliminated when you install the spin on filter? 2. If the screen is left in place, it must be removed and celaned at each oil change, correct? Eliacim N87071 Quoting John Cooper <[EMAIL PROTECTED]>: > ----[Please read http://ercoupers.com/disclaimer.htm before following any > advice in this forum.]---- > > > At 10:19 PM 5/30/2006, heavensounds wrote: > >Does anybody know (perhaps from the STC documents), or can estimate > >for me, the additional weight of adding a spin on oil filter > >adapter, plus the weight of the oil filter? > > The adapter weighs 1.2# and the filter 1.4#. these are actual, not > estimates. The filter holds roughly a pint, for an additional .7 or > .8#, so 3.5# is pretty close. The filter has a anti-backflow valve > in it which prevents the oil from draining back when the engine is shut > off.. > > > John Cooper, A&P > Skyport Services > PO Box 249 > 4996 Delaware Tnpk > Rensselaerville, NY 12147 > 518 797-3064 > Fax 518 797-3865 > www.skyportservices.net > > ============================================================================== > To leave this forum go to: http://ercoupers.com/lists.htm > > > > -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
