----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Hey Ed: Due to the serial number of your Ercoupe being prior to 813, You
will have to use a kit for Piper aircraft, STC is (Cleveland kit
#199-07100) This will put 6.00-6 tires on your coupe, which will also change the
height of the tail, and may require spacers. You should have no problem getting
FAA approval on a 337, because the kit is approved on Piper aircraft.
I have completed one of these in the past, and it
really made a difference on the braking ability of the airplane. (serial
171)
I do not know if John at Skyport has any kits in
stock, Univair used to carry them, and the price list (2 years ago) had the
Chrome kit listed at 1091.00 and the steel kit at 896.00
Of course, you still have to have tires and tubes,
and new lines made, along with the labor for the installation. Most likely, it
would be a good idea to install a new master cylinder when intstalling the
kit.
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
