----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Question..... I am thinking about putting
in a attitude gyro in my coupe, I did some measuring and looks like there is
not enough room in the instrument panel. I have an old one that is 8 inches
and that put it right up to the fire wall with no room for the lines. So
I was thinking of an electric attitude gyro which is only 6 inches but there
is a 14 volt and a 28 volt gyro. So is our Ercoupe's 14 volts or 28
volts ? I was also entertaining the thought of installing the Dynon
instrument, but I don't think the Ercoupe would support it with all the hook
ups needed. Any thoughts ? http://www.dynonavionics.com/
Thanks
Scott N3005H
Your Coupe is 14 Volt
You'd need field approval to install anything from Dynon.
This is taken right from their web page
Dynon's products are not FAA certified, but are permissible under the new US Light Sport Aircraft
rule where the manufacturer has approved its use.
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
