----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Yes, Tim: I have done it several times. I find the hardest part is putting
in all the counter-sunk rivets for the stiffeners. A friend has the correct
roller for the edges, which I borrow, and the edge rivets are no problem, using
a rivet squeezer. But getting all the stiffener holes drilled and counter sunk
takes quite a while ( guess I am just real slow). If one had a squeezer which
would reach 8 inches, then it would be a lot simpler. I have used a large drill
press to counter sink the holes, but still have to put in all the rivets by
hand.
Lynn Nelsen
============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
