----[Please read http://ercoupers.com/disclaimer.htm before following any
advice in this forum.]----
At 01:14 AM 9/21/2006, Ronald Black wrote:
Anybody got any ideas?
If it won't polish off, it must have diffused all the way through the
poly and paint. Unlikely.
2nd question: is there a good alternative to the typical "steel
needle leak" on a Stromberg when you don't shut off the gravity feed
from the cowl tank?
Anyone who tells you a Stromberg must leak is a defeatist. The steel
needle is not the best choice if leakage is important (or actually,
lack of leakage). Delrin is the way to go.
John Cooper, A&P
Skyport Services
PO Box 249
4996 Delaware Tnpk
Rensselaerville, NY 12147
518 797-3064
Fax 518 797-3865
www.skyportservices.net
==============================================================================
To leave this forum go to: http://ercoupers.com/lists.htm
