----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
Ed; Too many people have heard this and heard that but can never provide any data at all. Old Wives Tales, they call them and they could in fact have actually happened to more than a few folks. But without something to look at I won't comment on that report as I've seen the practice widely. I like to use Teflon tie wraps on a certificated airplane. They hold up much better and aren't that much more expensive if you know where to buy them. For example, I buy mine where from my fire alarm equipment supplier. But, these aren't priced to waste, either. Al DeMarzo Visit the Ercoupe Swap Page - Free and Easy http://www.ercoupeowners.com/swap/swapbook.htm ----- Original Message ----- From: Ed Clavel To: [email protected] Sent: Sunday, January 28, 2007 3:37 PM Subject: [COUPERS-TECH] Tie wraps ----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]---- Here's something new! I use nylon tie wraps on my engine mount to support the Ingition wireing etc. A fellow pilot at my airport said he had info on that the tire wraps may causing fracturing of the mount under the wrap. Comments? Ed N3396H ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
