----[Please read http://ercoupers.com/disclaimer.htm before following any advice in this forum.]----
- 8 No provision for starter or generator - 12 Starter, Generator and Associated parts installed - 14 Lord Engine mount bushings installed. Otherwise, like -12 models - 16 Vacuum pumpo adapter. Otherwise like -12 models F Flange type crankshaft installed (replaces tapered shaft) H Crankcase and crankshaft adapted to feed oil to controllable pitch propeller Eliacim N87071 > ----[Please read http://ercoupers.com/disclaimer.htm before following any > advice in this forum.]---- > > > The "dash" numbers always confuse me. Isn't the -12 the engine with the > vacuum pump? I thought we had the -8 but it's early and I haven't fully > awakened. > > ----- Original Message ----- >> [EMAIL PROTECTED] wrote >>> I'm looking for an STC or 337 for installing a C-85-12 in a 415-C? Can >>> anyone help? > >> Ed, >> I believe that no 337 is required. Refer to the type certificate for the >> 415-C (A718 Item 110.). >> >> John Roach >> N 2427H > > ============================================================================== > To leave this forum go to: http://ercoupers.com/lists.htm > > > > ============================================================================== To leave this forum go to: http://ercoupers.com/lists.htm
