I would not worry about the stops you can probably adjust the proper up
travel on the elevator dont worry about the down. Glenn Putnam
On Nov 21, 2007, at 10:09 PM, Glen Davis wrote:
Gang
I have an Ercoupe whose panel was relocated about one inch aft by the
former owner, John Rogers, now deceased. I am nearing the completion
of a complete restoration and the mechanic doing the work, Victor, has
repositioned the panel back to it's original location, like it was
from the factory. When I mentioned to John that I was moving the
panel back to the original position, he told me to make sure the
"stops" on the yoke (control shaft) were placed back in the correct
position of I would not get the correct elevator travel. I recently
mentioned to Victor that the stops needed to be readjusted. He asked
me to try to get more details on "the stops" and how to adjust them.
Can anyone send me an email which I will forward to Victor so he
understands what needs to be done and how?
Thanks
Glen
Glen Davis
917 297 1111
www.ishootpictures.com
www.ercoupepilot.com
