John

Thank you.  Both of those should be easy to locate.  Any chance you know the 
correct length the sleeve on the shaft behind the yoke?

Glen
  ----- Original Message ----- 
  From: John Cooper 
  To: 'Glen Davis' ; 'Ralph Haven' ; [email protected] 
  Cc: 'Victor Rodriguez' ; 'geoff (N23GD)' 
  Sent: Thursday, November 22, 2007 11:22 AM
  Subject: RE: [ercoupe-tech] yoke travel



  Gwen:



  The up stop is a shaft color behind the panel.  There is probably another 
bolt hole 1" forward of the one in use.  Just move the collar there.  The down 
stop is a sleeve on the shaft behind the yoke.  It will have to get 1" longer.



  New York is not New England? Thank goodness! I don't think I could take 
another New England Winter!



  John Cooper, A&P

  Skyport Services

  PO Box 249

  4996 Delaware Tnpk

  Rensselaerville, New Amsterdam 12147

  518 797-3064

  Fax 518 797-3865

  www.skyportservices.net 


------------------------------------------------------------------------------

  From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of 
Glen Davis
  Sent: Wednesday, November 21, 2007 10:10 PM
  To: Ralph Haven; [email protected]
  Cc: Victor Rodriguez; geoff (N23GD)
  Subject: [ercoupe-tech] yoke travel



  Gang



  I have an Ercoupe whose panel was relocated about one inch aft by the former 
owner, John Rogers, now deceased.  I am nearing the completion of a complete 
restoration and the mechanic doing the work, Victor, has repositioned the panel 
back to it's original location, like it was from the factory.  When I mentioned 
to John that I was moving the panel back to the original position, he told me 
to make sure the "stops" on the yoke (control shaft) were placed back in the 
correct position of I would not get the correct elevator travel.  I recently 
mentioned to Victor that the stops needed to be readjusted. He asked me to try 
to get more details on "the stops" and how to adjust them.  Can anyone send me 
an email which I will forward to Victor so he understands what needs to be done 
and how?



  Thanks



  Glen







  Glen Davis
  917 297 1111
  www.ishootpictures.com
  www.ercoupepilot.com



   
Glen



Glen Davis
917 297 1111
www.ishootpictures.com
www.ercoupepilot.com

Reply via email to