I am sure Vernon Gregery has the parts you need 803 360 2061 or see ad
in back of coupe capers Glenn Putnam
On Dec 10, 2007, at 2:51 PM, fnelson913 wrote:
I am assisting (or maybe getting in the way depending on your
perspective) my A&P/IA install rudder pedals in my 415-C. I have the
essential parts from a purchase on eBay and the needed drawing from
Univair. However as I read the drawings, I notice differences in what
is already present in my Ercoupe and what is ultimately needed for
the installation. I have no guard extending from the control column
to the edge of the seat. It is obviously only needed if you have
rudder control cables to protect. There are also brackets and plates
used to fasten the pulley wheels to the frame which change the
direction of the cables under the seat. Univair does not list the
part numbers. Obviously parts like this could be fabricated, but if I
could locate the parts from salvage or find a source for new parts
this would save me time and possibly money. Does anyone have any
suggestions?
Parts needed:
1) 415-52386 - Guard
2) 415-52395-R Bracket - R.H.
3) 415-52395-L Bracket - L.H.
4) 415-52387-R Plate - R.H.
5) 415-52387-L Plate - L.H.
Any help would be greatly appreciated.
Thanks.
Frank Nelson
N51DV - 415C
TOA - California
