Thanks, Syd. You were right. Univair did have parts that were not listed in the parts catalog. They said that they had the brackets and the guard, but not the plates. Maybe the plates are already there, I don't know yet. I ordered the brackets and they will be here Wednesday, but they don't have the guard in stock (3 to 4 weeks).
Thanks. Frank Nelson N51DV - 415C --- In [email protected], Syd Cohen <[EMAIL PROTECTED]> wrote: > > Frank, > Call Univair back and explain the situation. They do have some > parts in stock that they don't list in their catalog. Give it a try. > > Syd > > > > fnelson913 wrote: > > > I am assisting (or maybe getting in the way depending on your > > perspective) my A&P/IA install rudder pedals in my 415-C. I have the > > essential parts from a purchase on eBay and the needed drawing from > > Univair. However as I read the drawings, I notice differences in what > > is already present in my Ercoupe and what is ultimately needed for > > the installation. I have no guard extending from the control column > > to the edge of the seat. It is obviously only needed if you have > > rudder control cables to protect. There are also brackets and plates > > used to fasten the pulley wheels to the frame which change the > > direction of the cables under the seat. Univair does not list the > > part numbers. Obviously parts like this could be fabricated, but if I > > could locate the parts from salvage or find a source for new parts > > this would save me time and possibly money. Does anyone have any > > suggestions? > > > > Parts needed: > > > > 1) 415-52386 - Guard > > 2) 415-52395-R Bracket - R.H. > > 3) 415-52395-L Bracket - L.H. > > 4) 415-52387-R Plate - R.H. > > 5) 415-52387-L Plate - L.H. > > > > Any help would be greatly appreciated. > > > > Thanks. > > > > Frank Nelson > > N51DV - 415C > > TOA - California > > > > >
