Need some help with a plumbing issue.....here's the story.
I do not have the original fuel-lines for the plane so I have to make
my own.
I was mapping out the routing of all the lines and noticed something odd.
My fuel system didn't match the manual listing my planes serial number
diagram.
I have a 46' 415-c with 8 gallon wing-tanks.
These wing-tanks do not appear to be steel but seem to be aluminum,yes
I used a magnet.
Here's a few discrepancy's I have found in the manuals.....
1.I have 8 gallon tanks instead of 9 gallon and they appear to be
aluminum.
2.I have two ports on my right wing-tank instead of the left.
3.The manual shows the ports being side by side and my tank ports are
vertical.
4.The manual shows a picture of the fuel-line in a U shape in the
middle of the plane but none of the diagrams this U in the line.
5.The fuel diagram for my serial number is not possible due to the
ports on the wing-tanks.I would have to use the diagram for the steel
tanks to possibly make my set-up work.
Was there a modification I don't know about?
Do I have the wrong wing-tanks?
Can someone help me figure out how to route my fuel-lines please?
Kevin
