No drag penalty if the light is in the nosebowl, but I've been told that the bulbs don't last long due to engine vibration.

Syd


heavensounds wrote:

OK... What about the nose bowl option?
Eliacim
    ----- Original Message -----
    From: Dan Hall <mailto:[EMAIL PROTECTED]>
    To: Syd Cohen <mailto:[EMAIL PROTECTED]> ; heavensounds
    <mailto:[EMAIL PROTECTED]>
    Cc: [email protected]
    <mailto:[email protected]>
    Sent: Tuesday, April 22, 2008 11:00 PM
    Subject: Re: [ercoupe-tech] Landing Lights

Cut into the beautifully flush riveted and custom painted aluminum
    wings of my Ercoupe???
    That's NOT going to happen gentlemen !!!!               :-)
If I really needed that extra 8 MPH I'd be flying an RV. Dan Hall
    N3968H

        ----- Original Message -----
        From: heavensounds <mailto:[EMAIL PROTECTED]>
        To: Syd Cohen <mailto:[EMAIL PROTECTED]>
        Cc: [email protected]
        <mailto:[email protected]>
        Sent: Tuesday, April 22, 2008 8:17 PM
        Subject: Re: [ercoupe-tech] Landing Lights

        Skyport has a kit to install them in the wings. If I was
        installing landing lights I would go that way.
        Eliacim
            ----- Original Message -----
            From: Syd Cohen <mailto:[EMAIL PROTECTED]>
            Cc: [email protected]
            <mailto:[email protected]>
            Sent: Tuesday, April 22, 2008 9:45 PM
            Subject: Re: [ercoupe-tech] Landing Lights

            Yes, Dan, I am confident.  I've done quite a bit of drag
            testing on Ercoupes.

            Syd



            Dan Hall wrote:

            Hi Syd,
            Are you confident that number - 8 MPH for two landing
lights? The reason I ask is that I put two landing lights on the
            main gear fairings of my Ercoupe (no shades) about 5
            years ago and it didn't seem to make that big of a
            difference however; I didn't take before and after
measurements. I fly at night and also appreciate the visibility while
            flying here in very busy SoCal.
Dan Hall N3968H
                ----- Original Message -----
                From: Syd Cohen <mailto:[EMAIL PROTECTED]>
                Cc: [email protected]
                <mailto:[email protected]>
                Sent: Tuesday, April 22, 2008 7:07 PM
                Subject: Re: [ercoupe-tech] Landing Lights

                Just a caution, Ed.  Each landing light assembly will
                cost you about 4 mph.  Are you sure you want to do this?

                Syd



                Ed Granato wrote:

                I found two old farings with landing lights in them
                but I think they
                are too far gone to salvage. My existing farings are
                in great shape so
                one idea was to obtain a pair of cylindrical
                sections that house the
                lights and connect them to the farings already on
                the main gear. Does
                anyone have a pair of these or perhaps the entire
                faring-light combo in
                good shape that they would consider selling?

                
------------------------------------------------------------------------
                No virus found in this incoming message.
                Checked by AVG.
                Version: 7.5.524 / Virus Database: 269.23.3/1392 -
                Release Date: 4/22/2008 3:51 PM

        ------------------------------------------------------------------------
        No virus found in this incoming message.
        Checked by AVG.
        Version: 7.5.524 / Virus Database: 269.23.3/1392 - Release
        Date: 4/22/2008 3:51 PM


Reply via email to