Just completed an owner asisted Annual on 3439H, 415C with rudder pedals. All went well except the brakes. We installed a new master cylinder, blead the brakes , which are Clevelands, and have more brakes than we can remember.
Problem is - forward movement is fine and no dragging. But after a flight when we try to push it back into the hangar it is almost impossible to move. Seems brakes are not releasing after stopping. We removed the discs, greased the pistons and still hve the same problem. But after sitting for awhile they release and are OK. We also adjusted the cable in the plane to give additonal freedom. Any suggestions ? Jim N3439H FDK
