Mine are also made up of two pieces and have the rudder pedal assembly which needs to be removed before the floor boards can be removed. The only way it is accomplished is my 5'6" 125# son and pilot buddy.
From: [email protected] [mailto:[email protected]] On Behalf Of Jack Burwell Sent: Sunday, February 14, 2010 3:08 PM To: 'Ronald Hynes'; 'earl johnson' Cc: [email protected] Subject: RE: Fw: RE: [ercoupe-tech] Floor board removal Mine are made up of 2 pieces but they are still an absolute nightmare to remove and reinstall. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ronald Hynes Sent: Sunday, February 14, 2010 12:54 AM To: earl johnson Cc: [email protected] Subject: Re: Fw: RE: [ercoupe-tech] Floor board removal I will always admire old Henry Ford and his way of thinking. When he would have a difficult problem with manufacturing his autos, he was said to assign the problem to the lazyest of his employees because if they could not find a better way to fix the problem then there wasn't a better way. After 40 years of owning and driving Fords, I follow Henry's idea and I simply ask my sons. Never fails me. Ron Hynes, Alberta Canada --- On Sat, 2/13/10, earl johnson <[email protected]> wrote: From: earl johnson <[email protected]> Subject: Fw: RE: [ercoupe-tech] Floor board removal To: "Tech-Ercoupe Group" <[email protected]> Received: Saturday, February 13, 2010, 2:00 PM i have seen a Ercoupe with Floor Board made up of two pieces,not sure if it legal however i have been thinking about doing that sure would make under the floor board service easier. --- On Sat, 2/13/10, jackburwell2619@ comcast.net <jackburwell2619@ comcast.net> wrote: From: jackburwell2619@ comcast.net <jackburwell2619@ comcast.net> Subject: RE: [ercoupe-tech] Floor board removal To: "'rurndum'" <rurln...@smith- valley.com>, ercoupe-tech@ yahoogroups. com Date: Saturday, February 13, 2010, 2:00 PM I just went through the process assisting with the annual and it's a real pain having to remove the brake pedal and an even bigger pain reinstalling it and the boards. -----Original Message----- From: ercoupe-tech@ yahoogroups. com [mailto:ercoupe- t...@yahoogroups .com] On Behalf Of rurndum Sent: Saturday, February 13, 2010 12:37 PM To: ercoupe-tech@ yahoogroups. com Subject: [ercoupe-tech] Floor board removal I helped with an annual inspection yesterday on a '46 C Model. Removing the floor board was a pain because of the brake pedal being attached to it. Is there a modification to make the floor removal easier? Thanks! Jack _____ Image removed by sender. <http://ca.toolbar.yahoo.com/> Yahoo! Canada Toolbar : Search from anywhere on the web and bookmark your favourite sites. Download it now!
<<image001.jpg>>
<<image002.jpg>>
<<image003.jpg>>
