Thanks, it works on my 396 shows 7.4 volts on the internal battery. I will se what it shows when hooked to the airplane cig lighter. (when I get it back form my annual in March). You say it should be in excess of 12 volts?
Fred -----Original Message----- From: Hartmut Beil <[email protected]> To: [email protected]; Techlist Ercoupe <[email protected]> Sent: Mon, Feb 15, 2010 1:46 pm Subject: RE: [ercoupe-tech] Programming the Garmin GPS to show the Voltage field Ed. In the Garmin manual for the 696 on page 136 Appendix A: DATA FIELD OPTIONS, we find the "• External Voltage—the voltage on the external power input (cigarette lighter receptacle)." listed . >From the manual on page 30: Changing the information shown in the data bar fields:1) From the Map Page, Terrain Page, or the Info Page press the MENU Key.2) Turn or move the FMS Joystick to highlight ‘Change Data Fields’ and pressthe ENT Key.3) Move the FMS Joystick to highlight the desired data field.4) Turn the FMS Joystick to access the list of options, then turn or move theFMS Joystick to highlight the desired option and press the ENT Key. There is also an image showing how to select the voltage. Good luck. Hartmut To: [email protected]; [email protected] From: [email protected] Date: Mon, 15 Feb 2010 11:48:34 -0500 Subject: Re: [ercoupe-tech] Programming the Garmin GPS to show the Voltage field Thank you Hartmut, Works beautifully on the 196. I should never have sold my 196. Unfortunately maybe I don't know how to do it. I can't seem to get volts info on my 696. You did a great job of showing how to do it to the group. Keep up the great advise to us. Prof. Ed Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up now.
