Hi All.... A couple of questions tonight. I would like to install a battery master switch on the panel of our Coupe. I have the large 9 sq ft baggage compt installed and the Master Switch is curently licated on the R/H aft panel. The relay install portion is pretty straight forward, but how do I wire up the wires that lead from the regulator, through the combinded switch on the slanted hatshelf to the ammeter. Does this require a relay as well? Can I use an automotive style relay and slave it into the single Batt Mas switch on the datchWhat I would idealy want is to have one master swith on the panel which controls both the battery and the rgulator ccts.
I'm also loking for help with a transponder issue. I purchased a Bendix tr661A for our Coupe. It didn't come with a tray, but thats not a big issue, I require a pinout and perhaps and an electrical connector in the back. The avionics shops I talked to have no clue about the 661, or the type of connector it uses. Also can't find a current blind encoder to go with it as well. Some say that it my have been an older model which may have been absorbed when King bought out Bendix. Any help the group could provide would be Ggggrreeeaaattt Cheers Bob Pionteck CF-LAV
