Hi, On Tue, Jul 14, 2009 at 02:59:05PM -0700, [email protected] wrote: > I succeeded in installing rtai-3.7.1 earlier (before ethercat) and > ethercat version returns: > > IgH EtherCAT master devel r1590 > > since I found in the forum that -r1590 has the e100 driver in it for my > kernel version, which uname -a: > Linux bergenwald 2.6.24.7-rtai #1 SMP Fri Jul 10 14:14:52 MST 2009 i686 > GNU/Linux > I'm running Ubuntu 8.04 (hardy) with a GNOME 2.22.3 desktop. > > I note that the 1.6 bundle has no ethercat configure support for e100 > (removed?) as far as I can tell
not removed, but never been there, because the bundle still contains the stable 1.4.0 version. > and I got the same make error with the > etherlab-1.2-rc4 version contained within it. I also found that > #!/usr/bin/bash was necessary to get the ethercat command line tool to > work (this really should have been better documented). Do you speak of the init script (/etc/init.d/ethercat) or the command-line tool /opt/etherlab/bin/ethercat? None of them contains references to the bash. The last bashisms were removed in revision 1600, before releasing 1.4.0. Where exactly do you see bash calls? > The ethercat command line tool also hangs the system when attempting to > execute ./ethercat stop or ./ethercat restart. Any insight on this? I can > start it and do all the other usual things, e.g. ./ethercat slaves... This seems to be still an issue of the e100 driver. I have a system here that behaves the same way. I'll analyze it and try to fix this. -- Best regards, Florian Pose http://etherlab.org _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
