Hello Florian, I've been quite busy with other projects but had a couple hours today to try your newest versions from below.
I succeeded in getting the latest ethercat master to build and install without any difficulties. I did have a minor problem with building etherlab; there is still an "-e" printed right at the beginning of the kernel-cflags.c sourcefile by the make process somehow. I did remove the "echo -e" from line 35 of Kbuild in the /tools/rt_appcore as suggested earlier by Richard, but this "-e" still crept in. Removing it sorted out the make failure. There are issues with folder permissions when running setup_etherlab.m, but this is not necessarily a problem with ethercat/etherlab, just a problem with the Linux permissions for my Matlab installation in general. I did get it to finish precompiling all the object files for etherlab blocks, and am left with some weird thing where it complained about not being able to update the path (again a folder permission issue). However,the block libray exists now, so I will be trying the Matlab/Simulink/Ethercat stuff out next chance I get. Thanks to you and Richard for all your help! Regards, Dusty Clark MMT Observatory University of Arizona Tucson, AZ USA > I adapted EtherLab-1.3 to the new master interface. Please try this > pair: > > http://etherlab.org/download/ethercat/ethercat-devel-r1824.tar.bz2 > http://etherlab.org/download/etherlab/etherlab-1.3-pre-r589.tar.gz > _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
