Hi all, Finally, I've got the EL9800 Eva Board working, everthing is fine, device is going to OP state, the LED is on (and the one that supposed to be on). Next, I will try to build some more complex model and to play around (to include analog in and some switches). :) Be free, to contact me for details if you are interested in this matter.
Xml generation using 'ethercat xml' command still doesn't work but I don't care (for now), because the Beckhoff's xml file doing the job very good. And finally, some comments about this post: http://lists.etherlab.org/pipermail/etherlab-users/2009/000540.html Can someone explain how to set the input vector width in Generic Slave block (And what about the outputs? Are they really automatically set up correctly or they need some intervention too?) Regards, -- Mladen Knezic Teaching Assistant Faculty of Electrical Engineering Banja Luka, Bosnia and Herzegovina Web: www.etfbl.net Phone: +387 65 804 205 Fax: +387 51 211 408 _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
