Hi! First I want to say that I have already searched your mailing list for threads on my issue, but I did not find any. I am using etherlab 1.2-rc10 on linux kernel 2.6. I tried building a simple Simulink model from scratch like you instructed in the guide of Etherlab, here: http://etherlab.org/download/etherlab/etherlab-1.2.pdf I put in an EK1100 EtherCAT coupler block, an EL4132-AO block and a sine-wave into that (the EL4132). Nothing special here (exactly the same model as the right lower part of your standard "example.mdl" model that you show to users). I did the necessary configurations for the simulation and I clicked Ctrl+B. It started to build the RTW model and after countless compilation and build messages (nothing unusual, no warnings, no errors), at the end it says:
test1.c: In function 'test1_output': test1.c:72: error: implicit declaration of function 'rtmIsMajorTimeStep' gmake: *** [test1.o] Error 1 Real-Time Workshop build procedure for model: 'test1' aborted due to an error. Why is it doing that? How do I fix this error because I know I am not doing anything wrong. The standard "example.mdl" model gives me the same exact build output message when I try to build it. Thank you for your time and patience! Alex Marton
_______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users