Hello Alex, please use a 1.3-EtherLab-Version, or a "older" Matlab. Important: for Etherlab-1.3 you need a 1.5-EtherCatmaster. you find both on the etherlab.org site.
Greetings Wilhelm. Am 18.11.2010 19:12, schrieb Alex C. Marton: > Hello! > > Thank you for answering! I really need your help on this one. > My linux version is: openSUSE 11.2 "Emerald" - Kernel \r > My RTAI version is 3.7.1 > Matlab is R2009b, Simulink version is: v 7.4 and RTW is: v 7.4 > > Thank you! > Alex > > ------------------------------------------------------------------------ > *From:* Dr.-Ing. Wilhelm Hagemeister <h...@igh-essen.com> > *To:* Alex C. Marton <martona...@yahoo.com>; etherlab-users@etherlab.org > *Sent:* Thu, November 18, 2010 5:56:15 PM > *Subject:* Re: [etherlab-users] Build error in RTW: implicit declaration > of function 'xxxxxxxxxxxxx' > > Hallo Alex, > > please supply information over: > > LINUX-Version (which 2.6.xx) > RTAI-Version > Matlab/Simulink/RTW-Version > > Wilhelm. > > Am 18.11.2010 17:39, schrieb Alex C. Marton: >> Hi! >> First I want to say that I have already searched your mailing list for >> threads on my issue, but I did not find any. >> I am using etherlab 1.2-rc10 on linux kernel 2.6. I tried building a >> simple Simulink model from scratch like you instructed in the guide of >> Etherlab, here: >> http://etherlab.org/download/etherlab/etherlab-1.2.pdf >> <http://etherlab.org/download/etherlab/etherlab-1.2.pdf>I put in an >> EK1100 EtherCAT coupler block, an EL4132-AO block and a sine-wave into >> that (the EL4132). Nothing special here (exactly the same model as the >> right lower part of your standard "example.mdl" model that you show to >> users). I did the necessary configurations for the simulation and I >> clicked Ctrl+B. >> It started to build the RTW model and after countless compilation and >> build messages (nothing unusual, no warnings, no errors), at the end it >> says: >> >> test1.c: In function 'test1_output': >> test1.c:72: error: implicit declaration of function 'rtmIsMajorTimeStep' >> gmake: *** [test1.o] Error 1 >> Real-Time Workshop build procedure for model: 'test1' aborted due to an >> error. >> >> Why is it doing that? How do I fix this error because I know I am not >> doing anything wrong. The standard "example.mdl" model gives me the same >> exact build output message when I try to build it. >> >> Thank you for your time and patience! >> Alex Marton >> >> >> >> >> _______________________________________________ >> etherlab-users mailing list >> etherlab-users@etherlab.org <mailto:etherlab-users@etherlab.org> >> http://lists.etherlab.org/mailman/listinfo/etherlab-users > > _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users