Hallo Alex, please supply information over:
LINUX-Version (which 2.6.xx) RTAI-Version Matlab/Simulink/RTW-Version Wilhelm. Am 18.11.2010 17:39, schrieb Alex C. Marton: > Hi! > First I want to say that I have already searched your mailing list for > threads on my issue, but I did not find any. > I am using etherlab 1.2-rc10 on linux kernel 2.6. I tried building a > simple Simulink model from scratch like you instructed in the guide of > Etherlab, here: > http://etherlab.org/download/etherlab/etherlab-1.2.pdf > <http://etherlab.org/download/etherlab/etherlab-1.2.pdf>I put in an > EK1100 EtherCAT coupler block, an EL4132-AO block and a sine-wave into > that (the EL4132). Nothing special here (exactly the same model as the > right lower part of your standard "example.mdl" model that you show to > users). I did the necessary configurations for the simulation and I > clicked Ctrl+B. > It started to build the RTW model and after countless compilation and > build messages (nothing unusual, no warnings, no errors), at the end it > says: > > test1.c: In function 'test1_output': > test1.c:72: error: implicit declaration of function 'rtmIsMajorTimeStep' > gmake: *** [test1.o] Error 1 > Real-Time Workshop build procedure for model: 'test1' aborted due to an > error. > > Why is it doing that? How do I fix this error because I know I am not > doing anything wrong. The standard "example.mdl" model gives me the same > exact build output message when I try to build it. > > Thank you for your time and patience! > Alex Marton > > > > > _______________________________________________ > etherlab-users mailing list > etherlab-users@etherlab.org > http://lists.etherlab.org/mailman/listinfo/etherlab-users _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
