On Thursday 25 November 2010 08:39:21 takeshi ikeya wrote: > Hello !! > Anyone knows the reason ? > > I'm trying to use EtherLab's master. > When I connect one I/O slave (OMRON GX-MD1611), it goes all well. Well, while the master is working fine (it correctly detects a currupt mailbox), it seems as though the drive is not acting correctly.
Contact the drive manufacturor. It is not unusual that the manufacturor says "but it works with TwinCAT", wheras there are still are protocol implementation errors. - Richard > > I disconnect OMRON, connect YASKAWA's Sigma5 servo driver, and make > EtherLab's master stop-and-start. > While master is starting, it scans the bus, and complains that it receives > 'Corrupt mailbox response' , perhaps from YASKAWA (only one slave). > This happens before userspace application starts. > > I can't drive YASKAWA yet. > > What is wrong with YASKAWA ? > > Below is syslog > > EtherCAT: Master driver devel unknown > EtherCAT: 1 master waiting for devices. > ACPI: PCI interrupt for device 0000:03:06.0 disabled > ec_8139too EtherCAT-capable Fast Ethernet driver 0.9.28, master devel > unknown > ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 20 (level, low) -> IRQ 20 > EtherCAT: Accepting device 00:07:40:1E:97:B3 for master 0. > ec0: RealTek RTL8139 at 0xce00, 00:07:40:1e:97:b3, IRQ 20 > ec0: Identified 8139 chip type 'RTL-8139C' > EtherCAT 0: Link state changed to UP. > EtherCAT 0: Starting EtherCAT-IDLE thread. > EtherCAT 0: 1 slave(s) responding. > EtherCAT 0: Slave states: INIT. > EtherCAT 0: Scanning bus. > EtherCAT 0: Bus scanning completed in 8 ms. > EtherCAT 0: Slave states: PREOP. > EtherCAT ERROR 0-0: Corrupt mailbox response received! > EtherCAT DEBUG: 7E 00 01 00 00 63 00 80 04 00 00 00 01 10 05 00 > EtherCAT DEBUG: 00 07 45 72 72 6F 72 20 52 65 67 69 73 74 65 72 > EtherCAT DEBUG: 65 60 9A 60 B1 60 B2 60 B8 60 B9 60 BA 60 BC 60 > EtherCAT DEBUG: C1 60 C2 60 E0 60 E1 60 F4 60 FC 60 FD 60 FE 60 > EtherCAT DEBUG: FF 60 02 65 03 27 10 27 20 27 E0 27 3F 60 40 60 > EtherCAT DEBUG: 41 60 5A 60 5B 60 5C 60 5D 60 5E 60 60 60 61 60 > EtherCAT DEBUG: 62 60 63 60 64 60 65 60 66 60 67 60 68 60 6B 60 > EtherCAT DEBUG: 6C 60 6D 60 6E 60 71 60 72 60 74 60 76 60 77 60 > > > Thanks > > takeshi.ik...@gmail.com > -- ------------------------------------------------------------------------ Richard Hacker Amtsgericht Essen HRB 11500 Ingenieurgemeinschaft IgH USt-Id.-Nr.: DE 174 626 722 Ges. für Ingenieurleistungen mbH Geschäftsführung: Heinz-Baecker-Str. 34 Dr.-Ing. S. Rotthäuser D-45356 Essen Dr.-Ing. T. Finke Tel.: +49 201 / 36014-16 Dr.-Ing. W. Hagemeister Fax.: +49 201 / 36014-14 Tel.: +49 201 / 360-14-0 richard.hac...@igh-essen.com http://www.igh-essen.com ------------------------------------------------------------------------ _______________________________________________ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users