Any news on this issue? Best regards Kim Hedegaard Madsen
> -----Original Message----- > From: [email protected] [mailto:etherlab-users- > [email protected]] On Behalf Of Eugene Bordenkircher > Sent: 13. oktober 2010 18:00 > To: [email protected] > Subject: [etherlab-users] Beckhoff Slave Controllers and Device Reset > > We are trying to perform a device reset of a Beckhoff Slave controller. The > reset requires 3 consecutive writes to the appropriate register (0x40 or > 0x41). > > As far as we can tell, there's no way for the EtherCAT master to send > 3 consecutive register write frames. The master always seems to interject > another frame in between. Is this a correct observation? > If not, is there a way to perform these resets? If it is correct, is there a > way to > perform the reset with minor modifications to the master? > > Thank you for your help. > > Eugene T. Bordenkircher > _______________________________________________ > etherlab-users mailing list > [email protected] > http://lists.etherlab.org/mailman/listinfo/etherlab-users _______________________________________________ etherlab-users mailing list [email protected] http://lists.etherlab.org/mailman/listinfo/etherlab-users
