No such animal. It appears that Redhat has moved most of the stuff that was in the rc.modules to rc.sysinit, but I cannot find the section that deals with loading the scsi driver.
Garl
-----Original Message-----
From: Linux Rocks ! [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, July 17, 2002 8:43 PM
To: [EMAIL PROTECTED]
Subject: [EUG-LUG:3480] Re: Help with loading modules
Garl,
So... youve edited your /etc/modules.conf to reflect the change, do you need
to edit your /etc/rc.d/rc.modules to load the correct modules?
/etc/modules.conf is only configurations for all your modules, the actual
loading of modules happens in /etc/rc.d/rc.modules.
Jamie
Sometime just before Wednesday 17 July 2002 07:15 pm Grigsby, Garl Wrote
about:[EUG-LUG:3477] Help with loading modules
: Help. Well I just had a scsi card die in one of my linux servers. After
: a fair about of digging about, I found a replacement, but it is not same
: brand/model as the original card. I have done what I thought I needed to
: do to get the system to automatically load the module for this card at
: boot, but it refuses to do so. I can manually load the module and it
: works. I can mount the drives, copy files, etc. but no matter what I do,
: it refuses to load at boot.
:
: Originally I had a Buslogic BT-946C in the machine and my
: /etc/modules.conf file looked like this:
:
: alias scsi_hostadapter BusLogic
: alias eth0 3c59x
: alias parport_lowlevel parport_pc
:
: After installing the replacement card, a NCR 53c825, I modified the
: /etc/modules.conf file to this:
:
: alias scsi_hostadapter ncr53c8xx
: alias eth0 3c59x
: alias parport_lowlevel parport_pc
:
: The problem is I keep getting this message:
:
: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
:
: At this point the boot process halts (as it can't mount three disks) and
: goes into maintenance mode. If at this point I run a 'insmod ncr53c8xx'
: I can mount the missing disks and then switch to init 3 and everything
: works. What am I missing?!?
:
: Please help, before I pull the rest of my hair out.....
: Garl
:
:
: =======================================================================
: Garl R. Grigsby
: Senior Customer Applications Engineer - I-DEAS CAE & FEMAP Support
: -----------------------------------------------------------------------
: EDS PLM Solutions Phone: (800)955-0000
: Global Technical Access Center FAX: (541) 342-8277
: 1750 Willow Creek Circle Email: [EMAIL PROTECTED]
: Eugene, OR 97402 Internet: http://www.plmsol-eds.com
: =======================================================================
: -FEA makes a good engineer great, and a poor engineer dangerous-
: =======================================================================
--
for setting/changing your eug-lug mailinglist subscription use this website:
http://wWw.RockSolidNetworks.com/eug-lug.html
no microsoft products were used to produce this message.
