yeah... it was the i2c thing... once I added that, I was able to add the bttv,
and ohter associated modules... maybe later Ill try to compile it all in the
kernel..
Ive gotten the laptop going now... Its doing make dep .. It looks like it
will compile now. I was missing some libraries (needs ncurses for make
menuconfig... ) I found the hermes pcmcia module says it works with prism2
chips (my wireless nic...) we'll see if it will atleast get the device
functioning! I really want to get the hostap_cs module working, as It will
enable some nice features that are built into the card.
I had to remove the 2.4.19 source and use the 2.4.18 source only, later Ill
try to replace the 2.4.18 with 2.4.19, but I think it will fail to compile
properly... the README says not to put your 2.4.19 source in your /usr/src
directory, rather you should put it in userspace...
Jamie
On Monday 02 September 2002 10:50 am, Mike O wrote:
: Read the help for bttv in the kernel config. It'll
: tell you to make sure to have i2c and 'bit banging' or
: something like that. Then you can build bttv into the
: kernel too. Sometimes you have to link /dev/video ->
: /dev/video0 to get the TV working. Depends on the
: system.
:
: --- Linux Rocks ! <[EMAIL PROTECTED]> wrote:
: > Hey... I spent some time compliling kernel
: > yesterday... I have a nice kernel
: > for my desktop, but it seems that bttv module diddnt
: > get compiled... I have
: > no tv on my workstation :(
: > I looked around using make menuconfig, and found no
: > reference to it (so I
: > could ask it to compile as module...) I looked
: > though the source tree, and
: > found (under drivers/media/video) bttv files, since
: > its probably the only
: > module I need, is there a way to just make that
: > module and copy it to
: > /lib/modules/blah.blah... ?
: >
: > note: there is bttv.h, bttv.c, but no bttv.o
: >
: > As a side note, now the tv doesnt work under suse
: > (it did before compiling and
: > installing the new kernel under slackware... ) now I
: > get a video device
: > error.. do I need to makedev or something?
: >
: > Jamie
:
: __________________________________________________
: Do You Yahoo!?
: Yahoo! Finance - Get real-time stock quotes
: http://finance.yahoo.com
: _______________________________________________
: Eug-lug mailing list
: [EMAIL PROTECTED]
: http://mailman.efn.org/cgi-bin/listinfo/eug-lug
--
for setting/changing your eug-lug mailinglist subscription use this website:
http://wWw.RockSolidNetworks.com/eug-lug.html
no microsoft products were used to produce this message.
_______________________________________________
Eug-lug mailing list
[EMAIL PROTECTED]
http://mailman.efn.org/cgi-bin/listinfo/eug-lug
