On Saturday 17 December 2005 11:17 am, Mike Cherba wrote: > Alan, > Run "dmesg" after you plug it in and see what the system reports when > the drive is inserted. You might post the last ~10-20 lines of the > output here and we'll be able to help a bit better. This will tell you > a lot about what it sees. "lsusb" run as root will also tell you a fair > amount about how functional the setup is. > -Mike > dmesg output
usb-storage: device found at 37 usb-storage: waiting for device to settle before scanning usb 4-1: USB disconnect, address 37 usb 4-1: new high speed USB device using ehci_hcd and address 38 scsi163 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 38 usb-storage: waiting for device to settle before scanning usb 4-1: USB disconnect, address 38 usb 4-1: new high speed USB device using ehci_hcd and address 39 scsi164 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 39 usb-storage: waiting for device to settle before scanning usb 4-1: USB disconnect, address 39 usb 4-1: new high speed USB device using ehci_hcd and address 40 scsi165 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 40 usb-storage: waiting for device to settle before scanning usb 4-1: USB disconnect, address 40 usb 4-1: new high speed USB device using ehci_hcd and address 41 scsi166 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 41 usb-storage: waiting for device to settle before scanning Shorewall:net2all:DROP:IN=eth0 OUT= MAC= SRC=192.168.2.85 DST=192.168.2.255 LEN=175 TOS=0x00 PREC=0x00 TTL=64 ID=17 DF PROTO=UDP SPT=631 DPT=631 LEN=155 usb 4-1: USB disconnect, address 41 usb 4-1: new high speed USB device using ehci_hcd and address 42 scsi167 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 42 usb-storage: waiting for device to settle before scanning Vendor: Maxtor 6 Model: L200P0 Rev: BAH4 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) sda: assuming drive cache: write through SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) sda: assuming drive cache: write through /dev/scsi/host167/bus0/target0/lun0: p1 Attached scsi disk sda at scsi167, channel 0, id 0, lun 0 usb-storage: device scan complete lsusb output Bus 004 Device 035: ID 0d49:3100 Maxtor Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 046d:c404 Logitech, Inc. TrackMan Wheel Bus 001 Device 001: ID 0000:0000 _______________________________________________ EUGLUG mailing list [email protected] http://www.euglug.org/mailman/listinfo/euglug
