Hi Steve, Zeke and All, Not sure why everyone still uses circular pots when slide/linear ones are much easier to deal with, just a couple springs, stops and coupling it to the throttle cable, etc and save the money, hassles of the PB-6. Always buy several controls/pots so if they get dirty, etc just pop another in. Mount them upsidedown and not only won't it collect outside dust, any carbon dust from the resistor pad will drop out making a more reliable unit. If you are going to replace the pot in the PB-6 buying several high quality ones from say Allen/Bradley from Digi-Key, etc won't cost much more that the low quality stock one and worth it. Make sure it has no/flat or a good taper for our use. Audio tapers are too much in most cases. Jerry Dycus
________________________________ From: Steve Clunn <[email protected]> To: [email protected] Sent: Sunday, July 28, 2013 3:45 AM Subject: [EVDL] e-volks upgrade.... From: Zeke Yewdall >Question on the PB-6 throttle..... is it good for that to be getting wet all of the time... because it is,< not good at all , They are not the best pot boxes in the first place and not sealed , -- Steve Clunn Merging the best of the past with the best of the future. www.Greenshedconversions.com _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130728/9c336b75/attachment.htm> _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
