Are you sure the ends are aluminium? Without the screw terminals they are connected by nickel strips spot welded to the ends, not sure you can spot weld nickel to aluminium. I think they are plated steel.
-----Original Message----- From: EV [mailto:[email protected]] On Behalf Of via EV Sent: Wednesday, 17 September 2014 3:34 p.m. To: [email protected] Subject: [EVDL] Dissimilar metals on Headyways? I'm building up some headway packs. My understanding is they have aluminum end caps in the bare state, but when you get them with screw terminals the screw terminals are steel and sit on the aluminum. Might this make it better to wire them together with Aluminum plates rather than Copper plates? Does solder dipping the plate help? Thanks for the advice. _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
