Trying to solder to the pins of an EVSE takes a hellova soldering iron.


But for just soldering on some #12 wires for an L1, I tried this trick:

http://aprs.org/Energy/Charging/EVSE/cut-pins02x.jpg



Hackasawed a slot in the back and then crushed only ½ of the remainder into
a “U” shape to take the #12 wire.  This should take only about 40% of the
heat since I only have to heat about 40% of the pin…



Bob, WB4APR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20171010/eeef9a8f/attachment.html>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to