I always solder with a temp regulated iron from Weller. The strain relief in 
the handle provides the mechanical sturdiness and the wires are long enough to 
have no issue with some wicked up solder making them stiff as they are not 
required to be flexible, being embedded in the handle. I don't know the power 
of the Weller. Prob around 40WI first fill the pin with molten solder after 
lightly tinning the wire,then insert the wire into the molten bath of solder in 
the pin.Works like a charm.Cor


Sent from my T-Mobile 4G LTE Device
-------- Original message --------From: EVDL Administrator via EV 
<ev@lists.evdl.org> Date: 10/10/17  2:57 PM  (GMT-08:00) To: Electric Vehicle 
Discussion List <ev@lists.evdl.org> Cc: EVDL Administrator <evp...@drmm.net> 
Subject: Re: [EVDL] Soldering to the J-1772 Pins 
On 10 Oct 2017 at 15:49, Robert Bruninga via EV wrote:

> Trying to solder to the pins of an EVSE takes a hellova soldering iron.

Could you crimp them with a hammer crimper, or maybe with one of those cheap 
Chinese hex crimpers from Harbor Fright?

David Roden - Akron, Ohio, USA
EVDL Administrator

= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
EVDL Information: http://www.evdl.org/help/
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = 
Note: mail sent to "evpost" and "etpost" addresses will not 
reach me.  To send a private message, please obtain my 
email address from the webpage http://www.evdl.org/help/ .
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =


_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20171010/7172e887/attachment.html>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to