On 2019-05-11 12:44, John Lussmyer via EV wrote:
No.
If you have a DPDT switch, Put +12v on both the center contacts.
On one end, attach JUST the low beam light to ONE contact.
At the other end, Attach the low beam to ONE contact, and the HiBeam
to the other contact.

isn't that jumper  going to make them both go on ?..
I have 2 lights .


On Sat May 11 10:30:54 PDT 2019 ev@lists.evdl.org said:
on my electric motorcycle  I want to use my DPDT  3 postion switch to
have like a hi /lo beam, but both lights on "hi beam " and one on "low
beam"setting.

sw postion       1       2              3
1 light / off/  2nd light & 1st light both

Can do i do this by  jumpering across 1 & 3  on one side only??


--

Try my Sensible Email package! https://sourceforge.net/projects/sensibleemail/
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
Please discuss EV drag racing at NEDRA (http://groups.yahoo.com/group/NEDRA)

Reply via email to